STAHL

Triple protection: UPS system solution for an offshore platform

An Uninterruptible Power Supply is mandatory on oil rigs: for safety reasons, the signal lighting must be operational at all times. Tasked with designing a UPS solution for an offshore rig off the African coast, R. STAHL was faced with three challenges. The UPS system not only required protective measures against explosive atmospheres, but also had to be adapted to the great heat and maritime climate at the rig's location.

NORD Drivesystems

High-performance drives for port facilities

Facing a ceaseless stream of multi-ton loads, drives in portside gantry cranes are under constant pressure to perform. Users need and demand reliable solutions that deliver excellent dynamics, positioning precision, and cost efficiency in equal measure. Hoist and trolley drives used in shipyard or container terminal cranes therefore require specialized mechanics and electronics suitable for this demanding application area.

Weidmüller

Weidmüller's "ACT20M"

New product series packaged in a 6-mm module width for converting and isolating analogue signals. High levels of functionality with minimum space requirements. ACT20M product series with Ex Zone 2 approval.

BALLUFF

IO-Link Analog Plug: convert analog signals into IO-Link signals

Until now it has been costly to connect and incorporate analog input/output signals, even though they generally only make up less than 10% of the signals used in a system. The reasons include the use of shielded cable on the installation side and expensive multi-channel input modules on the controller side. The new IO-Link Analog Plugs from Balluff with their high resolution of 14 bits provide the solution. They are the ideal choice for systems with limited instances of analog signals.

Westermo Teleindustri AB

Emergency phone system for Europe’s largest suspension bridge

The Great Belt Fixed Link connects half of the Danish population with the rest of the European road and rail network. Approximately 11 million vehicles and 8,3 million train passengers cross the bridge each year. A new 2 x 1 Gbit/s fibre backbone network was recently installed to provide for all the data transmission from the weather stations and CCTV, and a new emergency phone system using IP telephony technology was installed. To provide the data communication between the telephone and the fibre backbone, the company A/S Storebælt has chosen the robust Westermo Wolverine Ethernet Extender.

Weidmüller

Weidmüller's "PRO-H" switch-mode power supplies

New family of EX approved power supply units designed to meet the needs of the processing industry and demanding automation technology solutions. Single-phase, slimline switch-mode power supplies save space when populating electrical cabinets. A truly international solution thanks to wide-range input and the corresponding approvals.

Steute

RF GFI/GFIS: Foot controls with new high reliability wireless technology

The advantages of wireless communication are particularly obvious in the case of foot controls. The units can be positioned at will and there are no cables to trip over or restrict movement. With the RF GFI/ GFIS series engineers wishing to exploit these advantages not only have a new series of wireless foot switches at their disposal; they can also use a new high reliability wireless standard developed by steute.

Dunkermotoren

Brushless DC servo motors now available with integrated EtherCAT interface

EtherCAT is an Ethernet-based field bus system that meets stringent real-time requirements and currently shows the highest rate of growth in terms of installed nodes in Ethernet-based field buses for industrial automation applications.

RITTAL

43% less energy consumption

With its newly developed TopTherm fan-and-filter units, Rittal is showing that significant improvements in ventilation are still possible. The innovation is the first in the world to use diagonal technology. When installed, it ensures a far better air throughput for improved ventilation in enclosures and housings. Other convincing advantages, besides the simple, tool-free assembly, are the ease of maintenance and increased efficiency. Extensive tests haven shown energy savings of 43%.

Bartec

POLARIS Touch Panel PCs for hazardous areas with LED Technology

POLARIS Touch Panel PCs with LED technology are an innovative enhancement of the existing POLARIS Panel PCs. Available in the sizes 5.7", 10.4" and 12.1", these devices have been designed for the comfortable handling of simple machines such as mixers, dryers or filling stations and for the control and supervision of complex machines such as reactors, centrifuges or ball mills. All POLARIS devices have been designed for use in zone 1 + 2 as well as in zone 21 + 22. This guarantees the habitual PC comfort also in hazardous areas. The Panel PCs are especially suitable for use in the chemical, petrochemical and pharmaceutical industry.

Join the 155,000+ IMP followers